|RUSSIAN VERSION HERE!|
Second annual MPEG4-AVC/H.264 codecs comparison
Frequently Asked Questions MSU Graphics & Media Lab (Video Group)
Frequently Asked Questions
Q: How did you choose metric set for your comparison?
A: We used metrics, which are implemented in MSU Quality Measurement Tool. In that tool we implemented objective comparison metrics that are most commonly used.
The main metric in our comparison is PSNR, because it is used in most objective comparisons, so our results will be understandable for everybody. We will increase the number of metrics in next comparison in spite of increasing measurements time.
Q: Did you try to find mistakes in your comparison?
A: Of course we did. Before the comparison start we found reviewers for our comparison. They got draft of our report the month before public release. In exchange they send to us list of comments and mistakes in our comparison. Such exchange significantly decreased number of mistakes in our report.
Q: How did you verify objective measurements?
A: We used different ways:
First, we have published our measurement tool. Lots of people
download it, use it, and some times send us bug reports
(as a rule, bugs are in work with file formats, B-frames in
AVI, etc). So, reliability of our tool now is much better than
in previous comparisons.
- Second, after completion of all measurements, we provided original sequences and full results to codec developers (only results of the developer's codec and one of the freeware reference codecs for each developer). Developers are really interested in good results for their codec and they can verify some strange results.
These are our methods to increase our results reliability.
- First, we have published our measurement tool. Lots of people download it, use it, and some times send us bug reports (as a rule, bugs are in work with file formats, B-frames in AVI, etc). So, reliability of our tool now is much better than in previous comparisons.
Q: You mainly test the encoders, why don't you call your comparison "encoder comparison"?
A: We use developer's decoder if it is provided to us with encoder. It means that developers can increase their results using decoder optimization, postfiltering, etc.
In next comparison we are going to make additional decoder compatibility tests.
Q: What computers have you used for measurements?
A: You can find information about our computers' configurations on this page, or on the 7-th page of PDF document.
Q: Why did you use deinterlaced sequences?
A: It is our common policy. We chose our sources similar to sequences, which ordinary users use. It is very difficult for ordinary user to get progressive sequence nowadays. As a rule, users get sequences to compress from DVDs, satellite receivers, DV-cameras, etc. They capture that sequences in real time using popular simple embedded deinterlacing methods. Such methods along with compressing artifacts decrease encoding performance on those sequences. We think that popular codecs should take into consideration such features of sequences with the help of prefiltering and advanced motion compensation.
Q: Is it possible for developers to use information about your testing set to make better their results in your comparison?
A: Theoretically it is possible. That is why we each time replace two or three sequences with absolutely new ones, publishing them only after finish of all measurements. So, user can draw more attention on that sequences (we also track differences in results with big interest).
Q: You have used ATI graphics accelerator on your computers and ATI codec is fastest in your comparison. Don't you think it is strange?
A: We used the same computers as in previous comparison last year. No one knew about ATI codec at that moment.
Anyway, we also were very interested, if ATI codec had used any hardware acceleration. However, such acceleration does not conflict with testing rules (we compare codecs for ordinary PC machines).
We made additional tests at another computer with following configuration:
- Processor: Pentium 4, 3.0 GHz with Hyper Threading
- Operation system: Windows XP Pro, SP2
- Memory: 1Gb
- Video accelerator: nVidia GeForce 6600 GT
- Hard disk: SATA 200Gb
Measurement results ("Foreman" sequence):
The main result is that ATI theoretically can use hardware
acceleration in codec, but in that case they use rather
common methods, which can work with different hardware.
Q: I think, you did not attempted visual comparison; there are only few frame pictures in your comparison!
A: We apply much attention to correct visual comparison. :)
- First, by choosing frames anyone can show that any codec is
better than any other! It is because the quality of different
frames in decoded sequence changes significantly. You can read
about such situation reasons in
Introduction to Video Codecs Comparison.
But people are still asking such questions; that is why we
introduced per-frame metrics in our comparison to show differences
in frames quality.
- Second, we developed special software
MSU Perceptual Video Quality,
which is created to conduct subjective blind (when
experts don't know what encoder was used for current sequence)
assessments using different testing methods from Butterfly-test
to ITU-T BT.500-11 standard recommendations. This program is
the only freeware tool for such assessments.
- Third, we are going to make number of visual subjective comparisons. First such comparison will be released soon.
- First, by choosing frames anyone can show that any codec is better than any other! It is because the quality of different frames in decoded sequence changes significantly. You can read about such situation reasons in Introduction to Video Codecs Comparison. But people are still asking such questions; that is why we introduced per-frame metrics in our comparison to show differences in frames quality.
Q: Why didn't you add codec X in your comparison?
A: For each codec we used presets, provided us by developers. So, only codecs, for which we were able to communicate with developers, were added to our comparison.
Q: Why did you measure High Profile separately?
A: This year, similar to previous comparison, we tested only Main Profile. More over, when we announced "Call for codecs", only one codec, according to our knowledge, could support High Profile good enough. However, when developers provided to us new version of their codecs, we discovered that at least three companies implemented High Profile.
Next year we are going to remove profile restrictions, but we will publish codec presets including used profile.
Q: Why did you use such strange rules for your informal comparison?
A: People already have sent to us a lot of suggestion to combine all results into one table. Actually, in the beginning we didn't want to make such table at all, because when one codec is best at low bitrates, another one could be better at high bitrates, third one at film material and fourth one at video conferencing. So, we can average out all results, but...
Nevertheless, we are going to improve informal comparison rues, so, you your suggestions are welcome.
Q: Why do codecs versions in your comparison are not the latest ones?
A: The thing is that comparison measurements take rather long time. But we didn't renew our codecs versions during the measurements (except critical bugs in codecs) to ensure fair conditions for all developers. So, some developers could release new version of their codec before comparison release.
In the future we are going to speed up our measurements using more productive work with developers and improving our measurement methods.
Q: Why didn't you use this type of diagrams?
A: We permanently increase both number of diagram types and number of graphs. There are seven diagram types in our last comparison. In future we are going to add some new diagram types and replace some of existing ones with improved versions. We have already started work in that direction.
Q: Why do your measurements take so much time?
A: There are number of factors, which increase measurement time:
- People often ask us to increase number of sequences to analyze codec results in new application areas. Only pure measurements time is now more than 11 days. We are going to use additional computers, but increase of sequence number will increase time of human work in any case. Currently, all our comparisons are free, so we are trying to limit human work time.
- Another tendency is to increase number of metrics. We know about drawbacks of PSNR and will add new metrics, trying to limit their number in reasonable boundaries.
- Number of codecs is also increasing. We are interested in number of codecs increase, but at the same time it increases time to report preparation.
- If we find obvious mistake in codec, we, as a rule, send a bug report to developer. Some times developers can fix that bugs and send us new version. That is correct approach in developer's point of view, but it also increases number of measurements in our comparison.
- Report verification takes lots of time, because we are trying to increase report quality as much as possible.
So, if we decrease number of measured metrics and sequences in set, prohibit developers to fix bugs and remove report verification, we will speed up our comparison in few times.
Q: When will you make new comparison?
A: In September 2006, if we will not make two comparisons in year. :)
MSU video codecs comparisons resources:
- Introduction to Video Codecs Comparison
- Lossless Video Ñodecs Comparison 2004 (October 2004)
- MPEG-4 SP/ASP Video Codecs Comparison (March 2005)
- JPEG 2000 Image Codecs Comparison (September 2005)
- First Annual MPEG-4 AVC/ H.264 Video Codecs Comparison (January 2005)
- Second Annual MPEG-4 AVC/H.264 Video Codec Comparison (December 2005)
- Subjective Comparison of Modern Video Codecs (February 2006)
- MPEG-2 Video Decoders Comparison (May 2006)
- WMP and JPEG2000 Comparison (October 2006)
- Third Annual MPEG-4 AVC/H.264 Comparison (December 2006) (All versions for free!)
- Lossless Video Codecs Comparison 2007 (March 2007)
- Fourth Annual MPEG-4 AVC/H.264 Comparison (December 2007) (All versions for free!)
- Options Analysis of MPEG-4 AVC/H.264 Codec x264 (December 2008)
- Fifth MPEG-4 AVC/H.264 Comparison (May 2009) (All versions for free!)
- Sixth MPEG-4 AVC/H.264 Comparison (May 2010)
- Seventh MPEG-4 AVC/H.264 Comparison (May 2011)
- Eighth MPEG-4 AVC/H.264 Comparison (May 2012)
- Ninth MPEG-4 AVC/H.264 Comparison (Dec 2013)
- Tenth Video Codec Comparison (HEVC) (Oct 2015)
- Eleventh Video Codec Comparison (HEVC) (Aug 2016)
- Twelfth Video Codec Comparison (HEVC) (Aug 2017)
- Thirteen Video Codec Comparison (HEVC) (Aug 2018) (New!)
- Codec Analysis for Companies:
|Last updated: 27-June-2019|
Project updated by
Server Team and MSU Video Group
Project sponsored by YUVsoft Corp.
Project supported by MSU Graphics & Media Lab